Office Building Chiller Hire In London.
The 3″ hose running down the building from the roof. this connects the chiller to the roof chilled water pipe-work/ pumps
Climate Rentals were approached by a customer that was experiencing problems with the chiller at their central London offices.
The client was occupying an older 30,000sq/ft building on a short four year lease- after which the site was due for re-development.
Unfortunately, the buildings chiller was found in poor condition with a number of issues which were un-economical to repair, including, burnt out compressors, broken controls and un-serviceable R22 refrigerant charge.
Previously, the client had spent considerable sums of money to keep the machine operational, but found itself in the position of having a machine that was ultimately uneconomical to repair.
Moreover, the short lease also meant that the client didn’t want to commit large amounts of capital to replace the machine. Hence, office building chiller hire in London was a service he was keen to investigate.
Climate Rentals proposed a water chiller on a fixed term agreement. Set monthly costs, including all equipment, servicing and any breakdown/ repair’s appealed to the client following the open ended costs for the redundant machine.
A reliable, efficient Daikin 300kw chiller was installed with reinforced rubber hosing to connect to the buildings existing flow and return chilled water pipe-work. It was decided to install the chiller at ground level to reduce installation costs- a crane lift would have required a road closure.
Full integration was made to the buildings BMS system for auto control. The system was installed and commissioned in 1 day and has been in reliable operation for 4 years.
The Diakin chiller was located in the car park and the chilled water hosing and cabling run up the side of the building to the roof where it was connected to the buildings chilled water system. The system was manually filled and pressurised before bringing on-line to the building to prevent disruption.
3″ 10Bar reinforced rubber hosing system with Camlock connectors was specified; this sort of system is quick to install and very durable.
Major mechanical problems or older obsolete units can present major financial costs to companies. Repairs and refurbishments can be very costly, raising the question “is it a good investment to make in potentially unreliable and inefficient equipment?”
Chiller leasing can provide a practical solution to these problems.